riak ubuntu 11 building problems

Andrew Musselman andrew.musselman at gmail.com
Tue Nov 8 23:44:12 EST 2011


Have you tried this series of commands?

wget http://erlang.org/download/otp_src_R14B03.tar.gz
tar xzvf otp_src_R14B03.tar.gz
cd otp_src_R14B03/
./configure && make && sudo make install

git clone https://github.com/basho/riak.git
cd riak/
git checkout 1.0.1-release
git fetch
git pull
make rel

If that fails please answer with relevant errors along the way..

Best
Andrew

On 11/08/2011 06:23 PM, Ivan Trajkovic wrote:
> I have ubuntu 11.04, not 11.10
> could that be an issue
>
> On Tue, Nov 8, 2011 at 8:14 PM, Andrew Musselman 
> <andrew.musselman at gmail.com <mailto:andrew.musselman at gmail.com>> wrote:
>
>     I can confirm building both erlang and riak from source on Ubuntu
>     11.10 works.
>
>     That is, everything builds without any complaints or editing
>     config files, and then I'm able to add an object to a riak client.
>
>     wget http://erlang.org/download/otp_src_R14B03.tar.gz
>     tar xzvf otp_src_R14B03.tar.gz
>     cd otp_src_R14B03/
>     ./configure && make && sudo make install
>
>     git clone https://github.com/basho/riak.git
>     cd riak/
>     git checkout 1.0.1-release
>     git fetch
>     git pull
>     make rel
>
>     Thanks all for the advice.
>
>     Best
>     Andrew
>
>
>
>     On 11/08/2011 04:49 PM, Ivan Trajkovic wrote:
>>     yep encountered that issue already and made sure Im using whats
>>     supported
>>     so R14B3, and checking out riak-1.0.1
>>
>>     On Tue, Nov 8, 2011 at 7:17 PM, Jared Morrow <jared at basho.com
>>     <mailto:jared at basho.com>> wrote:
>>
>>         When you say you are building from source (github) 1.0.1, are
>>         you doing a 'git checkout riak-1.0.1' or building from
>>         'master'?   One note, based on your erts version, you are
>>         using a newer erlang than we support.   We have not built or
>>         tested Riak against erlang R15.   Try using R14B02 or R14B03
>>         for Riak 1.0.1.   If you are building Riak off of master, you
>>         can use R14B04 as well.
>>
>>         -Jared
>>
>>         On Tue, Nov 8, 2011 at 3:45 PM, Ivan Trajkovic
>>         <ivan.ebiz at gmail.com <mailto:ivan.ebiz at gmail.com>> wrote:
>>
>>             hi Jared, thank you for your fast response...
>>             interestingly riak 1.0.1 does build now, from source
>>             (github)... unlike before... not really sure what changed.
>>             but the old errors are coming up again, when trying to
>>             start riak:
>>
>>             ~/Desktop/riak/rel/riak$ bin/riak start
>>             escript: Failed to open file:
>>             ~/Desktop/riak/rel/riak/erts-5.9/bin/nodetool
>>             escript: Failed to open file:
>>             ~/Desktop/riak/rel/riak/erts-5.9/bin/nodetool
>>             Error reading ~/Desktop/riak/rel/riak/etc/app.config
>>
>>
>>             erts-5.9/bin/nodetool really isnt there
>>             app.config however is present, but Im guessing that error
>>             is dependent on the nodetool failure error coming up
>>
>>
>>
>>         <Thread deleted for size constraints >
>>
>>
>>
>>
>>     _______________________________________________
>>     riak-users mailing list
>>     riak-users at lists.basho.com  <mailto:riak-users at lists.basho.com>
>>     http://lists.basho.com/mailman/listinfo/riak-users_lists.basho.com
>
>
>
>
> _______________________________________________
> riak-users mailing list
> riak-users at lists.basho.com
> http://lists.basho.com/mailman/listinfo/riak-users_lists.basho.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.basho.com/pipermail/riak-users_lists.basho.com/attachments/20111108/2b38d277/attachment.html>


More information about the riak-users mailing list