50-100 ops/sec on a 5 Node cluster
jeremiah.peschka at gmail.com
Tue Jun 26 12:28:42 EDT 2012
Not being familiar with basho bench, these might seem like stupid
questions, but here goes:
What are the sizes of the operations that you're performing?
How have you configured your EBS storage?
A single EBS volume can only perform about 100 I/O operations per second,
give or take. A single host in AWS has a 1 gigabit ethernet connection.
That means every guest on the host has, at most, a theoretical maximum of
125MB/s of throughput for both incoming *and* outgoing data transfer. Due
to TCP/IP overhead, this is closer to 70-80MB/s.
If you're writing a lot of small items and causing flushes to disk (DW >
0), then there's your problem.
If you're writing a lot of large items, there's your problem.
If not, please see the previous emails from Basho employees, who are much
smarter than me. :)
Managing Director, Brent Ozar PLF, LLC
On Tue, Jun 26, 2012 at 9:00 AM, Reid Draper <reiddraper at gmail.com> wrote:
> On Jun 26, 2012, at 11:48 AM, David Smith wrote:
> > What does your basho_bench config file look like?
> > Seeing a low number of ops/sec is usually an indicator that you're
> > hitting a bottleneck on the I/O path -- typically due to random reads.
> > LevelDB has a number of characteristics that can make this worse --
> > what happens if you use bitcask?
> > D.
> > On Tue, Jun 26, 2012 at 4:57 AM, Yousuf Fauzan <yousuffauzan at gmail.com>
> >> Hello,
> >> Here is my setup of Riak 1.1.4
> >> 5 Nodes
> >> ami-a29943cb (EC2 AMI)
> >> m1.large (7.5GB Ram, 4 EC2 compute instances)
> >> EBS storage
> I'd recommend giving ephemeral storage a shot as well. It tends to have
> significantly less variable performance than EBS.
> >> LevelDB backend
> >> Python Client with Protobuf (on a separate machine)
> >> While loading data I am getting around 50 ops/sec.
> >> I tried running basho benchmark on the setup and it showed 100 ops/sec
> >> throughput.
> >> After talking to people or Riak IRC, I realized that upwards of 1.5K
> >> is what I should be getting.
> >> Could anyone help me in figuring out what I am doing wrong?
> >> Thanks,
> >> Yousuf
> >> _______________________________________________
> >> riak-users mailing list
> >> riak-users at lists.basho.com
> >> http://lists.basho.com/mailman/listinfo/riak-users_lists.basho.com
> > --
> > Dave Smith
> > VP, Engineering
> > Basho Technologies, Inc.
> > dizzyd at basho.com
> > _______________________________________________
> > riak-users mailing list
> > riak-users at lists.basho.com
> > http://lists.basho.com/mailman/listinfo/riak-users_lists.basho.com
> riak-users mailing list
> riak-users at lists.basho.com
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the riak-users