Riak S2 error

Michael Walsh mike at walshnetwork.com
Thu Jan 7 11:53:12 EST 2016


Sure thing.

And thanks!


advanced.config:
{riak_kv, [
    {add_paths, "/usr/lib64/riak-cs/lib/riak_cs-2.1.0/ebin"},
    {storage_backend, riak_cs_kv_multi_backend},
    {multi_backend_prefix_list, [{<<"0b:">>, be_blocks}]},
    {multi_backend_default, be_default},
    {multi_backend, [
        {be_default, riak_kv_eleveldb_backend, [
            {total_leveldb_mem_percent, 30},
            {data_root, "/var/lib/riak/leveldb"}
        ]},
        {be_blocks, riak_kv_bitcask_backend, [
            {data_root, "/var/lib/riak/bitcask"}
        ]}
    ]}
]}.

On Wed, Jan 6, 2016 at 5:44 PM, Shunichi Shinohara <shino at basho.com> wrote:

> Hi Michael,
>
> Could you provide all the result of "riak config generate -l debug" as
> well as
> riak.conf and advanced.config?
>
> Thanks,
> Shino
>
> 2016-01-07 9:05 GMT+09:00 Michael Walsh <mike at walshnetwork.com>:
> > All,
> >
> > I'm trying to set up a RIak S2 instance to integrate with KV and I'm
> getting
> > the following cuttlefish error out of advanced.config. Any suggestions on
> > where I'm going wrong?
> >
> > notes: erlang error was fixed. All paths are correct.
> >
> > Thanks!
> >
> > -Michael Walsh
> >
> > $riak config generate -l debug
> >
> > ...
> >                              {riak_kv,
> >                               [{add_paths,
> >
> > "/usr/lib64/riak-cs/lib/riak_cs-2.1.0/ebin"},
> >
> {storage_backend,riak_cs_kv_multi_backend},
> >                                {multi_backend_prefix_list,
> >                                 [{<<"0b:">>,be_blocks}]},
> >                                {multi_backend_default,be_default},
> >                                {multi_backend,
> >                                 [{be_default,riak_kv_eleveldb_backend,
> >                                   [{total_leveldb_mem_percent,30},
> >                                    {data_root,"/var/lib/riak/leveldb"}]},
> >                                  {be_blocks,riak_kv_bitcask_backend,
> >
> > [{data_root,"/var/lib/riak/bitcask"}]}]}]}) (lists.erl, line 1247)
> >   in function  cuttlefish_escript:engage_cuttlefish/1
> > (src/cuttlefish_escript.erl, line 375)
> >   in call from cuttlefish_escript:generate/1 (src/cuttlefish_escript.erl,
> > line 258)
> >   in call from escript:run/2 (escript.erl, line 747)
> >   in call from escript:start/1 (escript.erl, line 277)
> >   in call from init:start_it/1
> >   in call from init:start_em/1
> >
> > _______________________________________________
> > riak-users mailing list
> > riak-users at lists.basho.com
> > http://lists.basho.com/mailman/listinfo/riak-users_lists.basho.com
> >
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.basho.com/pipermail/riak-users_lists.basho.com/attachments/20160107/1aede024/attachment-0002.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: riak.conf
Type: application/octet-stream
Size: 13423 bytes
Desc: not available
URL: <http://lists.basho.com/pipermail/riak-users_lists.basho.com/attachments/20160107/1aede024/attachment.conf>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: riak_config_gen
Type: application/octet-stream
Size: 15723 bytes
Desc: not available
URL: <http://lists.basho.com/pipermail/riak-users_lists.basho.com/attachments/20160107/1aede024/attachment.obj>


More information about the riak-users mailing list